rk11 ?

Post pictures of your tanks, creative ways you've used Digital Aquatics products and more!
Jbella9653
Posts: 6
Joined: Tue Sep 11, 2012 5:27 pm
How many years have you been in the hobby?: 0

rk11 ?

Postby Jbella9653 » Thu Mar 28, 2013 9:18 am

what is the name of the connector system used isn't it rk11 ? or is it something else ? and can someone send me a diagram of the termanals inside the connectors for example pin to wire coler? thanks in advance

User avatar
DaveMorris
Posts: 2849
Joined: Wed Aug 06, 2008 9:08 pm
How many years have you been in the hobby?: 12

Re: rk11 ?

Postby DaveMorris » Thu Mar 28, 2013 9:52 am

If you are talking about bus cables, the connector is a six conductor RJ11 jack. (RJ11-6C) As for wiring, that is a straight 1 to 1 run of wire. Keep in mind that making your own cables is risky if you are not 100% confident in your abilities. You can burn out modules with them getting wired wrong.
Dave
My tank: http://www.sdreefs.com/forums/showthread.php?103096-My-300g-to-120g-Upgrade
Image

Jbella9653
Posts: 6
Joined: Tue Sep 11, 2012 5:27 pm
How many years have you been in the hobby?: 0

Re: rk11 ?

Postby Jbella9653 » Thu Mar 28, 2013 10:19 am

I need to replace the female connection point to the pc4 it was corroded to the point of not working Im going to go looking for replacement parts I can solder well enuf to do it , I was thinking that if I can figure the terminal on top of the part to the prong insise then I could replace with a part I have already I guess I can use my meter to figure that out .

Jbella9653
Posts: 6
Joined: Tue Sep 11, 2012 5:27 pm
How many years have you been in the hobby?: 0

Re: rk11 ?

Postby Jbella9653 » Thu Mar 28, 2013 10:20 am

I have a "lite " with two pc4s . I was thinking on getting a net module . what's your take on the net part good or bad ?


Return to “Customer's Systems”

Who is online

Users browsing this forum: No registered users and 1 guest