3 posts • Page 1 of 1
- Posts: 24
- Joined: Wed Jul 10, 2013 9:08 am
- How many years have you been in the hobby?: 0
I just received my new DP1 which I will use for a slave but upon hooking it up I don't get no blue status light, so I hooked it up like I was using it for a master and I still get no response. Any ideas? Maybe I should return it.
- Posts: 6139
- Joined: Mon Sep 08, 2008 5:54 am
- How many years have you been in the hobby?: 30
I think the issue is the blue module status light is not coming on. That should be solid blue reguardless of whether the power supply is connected or not. I have my supply hooked to a PC4 outlet that is programmed as on/off always on. Low level or overfull switches in the sump will trip an alarm that turns of the power to all three DP1's. This power is only for the motors for the pumps. The module logic is powered by the buss.
Who is online
Users browsing this forum: No registered users and 1 guest